When we use wood shaving machine routine life, when may came across many problems of oue wood shaving machine, as a supplier of wood shaving machine, I know the machine very well, and in the passage, I will show you some problems you may come across and how to solve these problems.

1. Question:Belts are easy to bite when used with wood shaving machine.
Answer:The reason is that the rotor of the motor and the rotor of the shaving machine are not concentric, and the position of the motor can be moved leftwardly or rightwardly, or padding can be added under the foot of the motor to adjust the concentricity of the two rotors.
2. Question:Low production rate of wood shavings.
Answer:Cause: The blade is not sharp or the knife is not adjusted to a suitable position. Solution: Remove the knife, sharpen the blade, and adjust the blade to the proper chip position.
3. Question:Difficult to feed, knife hard to cut.
Answer:Cause: The knife is worn badly and the clearance of the knife is too large or too small. Solution: Grind the blade to ensure that the blade is sharp.
4. Question:Feeding too fast machine crashes.
Answer:Reason: The feed is uneven and the blade is not sharp. Solution: Evenly feed material to ensure that no material is stored in the crusher. Grind the blade to speed up the cutting of the knife.
5. Question:Bearing heating.
Answer:Reason: There is no butter in the bearing seat, the bearing seat is not installed, and the bearing is damaged. Belt is too tight. Solution: Add grease to the bearings, balance the bearings and seats, replace the bearings, and adjust the elasticity of the belt so that the equipment can work normally.
 
After knowing the above information, do you know how to use the wood shaving machine? If you still have questions about the wood shaving machine, please feel free to contact us, we will try our best to solve your questions.
 
 
If you need further information about our wood shaving machine, please contact us freely, we will do our best to cooperate with you. Our contact information is as follows:
Any problem you can contact freely,or visit website freely.
Email:Tina@machinehall.com
Phone/whatsapp:+8618539931566
skype:Tina@machinehall.com